SHEETMETAL SERVICES

Our Sheetmetal Services will do Most Materials with the exception of PLASTICS. Parts in Days, NOT Weeks!

If your parts don’t fit the below guidelines, feel free to contact us to discuss your project.

bending1.jpg

  • Part Maximum Length = 48”

  • Ideal inside radius to be same as material thickness. Example: For 0.125” thick Material, ideal inside radius will be 0.125”.

  • Minimum thickness = 0.020” thick

  • Maximum thickness = 0.500” thick

  • Minimum part size = 1.000” x 1.000”

  • Holes , edges and cutouts close to Bend lines will Distort in the bending process.

  • Witness marks from the bending process will be visible and can become more noticeable depending on the material. (Please inform us if parts are cosmetic)

  • Bend reliefs might be required depending on part design.

  • Typical tolerances:

  • Part Size +/-0.010”

  • Angle +/-1 Degree