WATERJET CUTTING SERVICES
Minimum Part spacing is 0.200” between parts and a 0.500” space all around the sheet is required to allow us to clamp material to waterjet table. Thicker materials will require more space. Waterjet cutting will leave a sharp edge and cut will have a sandblasted look with some striations which will vary depending on cutting speed.
If your parts don’t fit the below guidelines, feel free to contact us to discuss your project.
Waterjet Cutting will cut Most Materials with the exception of Glass
No Heat is generated on the cutting process
Minimum thickness = 0.005” thick
Maximum thickness = 7” thick
Minimum part size = 0.500” x 0.500”
Maximum part size = 48.00” x 96.00”
Minimum hole size = 0.063” for Most Materials
Minimum hole size for Composites is 0.125”
Typical tolerances:
Holes +/-0.005”
Hole Location +/-0.005”
Profile +/-0.010”