Littleton, MA Mon to Fri, 7am to 5pm ET

Projects

Parts from our shop floor.

Real parts cut, formed and finished at ACP Waterjet in Littleton, Massachusetts, and the machines that made them. Every photo on this page is one of ours. No stock photos, no AI images.

What our customers and the BBB say

BBB rating, accredited business

Average Google rating, 60+ reviews

15+

Years cutting and forming metal

500+

Engineers and teams served

Waterjet Cutting

Thick, cold cut parts.

Our abrasive waterjet cuts metal, plastic and rubber up to 4.00″ thick with no heat affected zone.

A 4 inch thick waterjet cut part with a tape measure at ACP Waterjet — 4″ thick waterjet partMeasured at 4 inches.

Tape measure showing a 4 inch thick waterjet cut aluminum disc at ACP Waterjet in Littleton, MA — 4″ thick aluminumA waterjet cut aluminum disc.

A 2 inch thick black rubber ring cut on the waterjet at ACP Waterjet — 2″ thick rubber ringWaterjet cut rubber.

Stack of waterjet cut copper busbars at ACP Waterjet — Copper busbarsA stack, cut on the waterjet.

Waterjet cut Delrin wrench tool with clean edges and no heat marks — Delrin wrenchClean edges, no heat marks.

The crane lifts a cut plate skeleton and the parts stay on the waterjet table at ACP Waterjet — Off the waterjet tableThe skeleton lifts away, the parts stay.

Laser Cutting

Sheet and plate, cut fast.

A fiber laser for steel, stainless and aluminum up to 1.000″, and a Kern CO2 laser for acrylic.

Fiber laser cutting machine with a large cut steel sheet on the bed at ACP Waterjet in Littleton, MA — Large laser cut sheetSteel on the fiber laser bed.

A laser cut steel ring flange with bolt holes at ACP Waterjet — Steel flangeLaser cut, with bolt holes.

Stainless shimAn intricate flat profile.

The Kern CO2 laser head cutting acrylic at ACP Waterjet — Acrylic on the CO2 laserCut on our Kern laser.

A laser cut black foam sheet with slots at ACP Waterjet — Laser cut foamSlots cut in a foam sheet.

The ACP branded Kern ECO100 laser gantry cutting a board at ACP Waterjet — Our Kern ECO100The CO2 laser gantry at work.

Bending

Formed on TRUMPF press brakes.

Flat blanks go from the laser or waterjet straight to the press brake, with bends up to 96″ long.

A bent bracket next to its flat blank on the press brake bed at ACP Waterjet — Bracket and its blankBent next to the flat part.

Rows of identical bent aluminum brackets made at ACP Waterjet — Aluminum bracketsRows of identical bends.

Fanned stack of identical stainless steel parts formed on the press brake at ACP Waterjet — Stainless parts, formedA fanned stack, all the same.

Black laser cut and bent metal shelves made at ACP Waterjet — Metal shelvesLaser cut, then bent.

A part bending on the TRUMPF press brake, the red safety beams across the die, at ACP Waterjet — Mid bendThrough the safety beams.

Hardware and Finishing

Fitted, finished and shipped.

Countersinks, threads and pressed in hardware go in under the same roof, then the parts are packed for the trip.

Thick copper bus brackets fitted with steel hardware at ACP Waterjet — Copper bus bracketsThick copper with hardware.

A copper bracket with a pressed in stud at ACP Waterjet — Copper bracketWith a pressed in stud.

Studs pressed into an aluminum panel at the insertion press anvil at ACP Waterjet — Studs in an aluminum panelAt the insertion press.

Parts with countersunk holes in a bin at ACP Waterjet — Countersunk partsReady for flat head screws.

Black cut wayfinding numerals mounted on concrete, made at ACP Waterjet — Wayfinding numbersBlack numerals for a building.

Cut metal parts vacuum packaged for protection before shipping at ACP Waterjet — Vacuum packagedProtected for shipping.

Have a part like these?

Order online with a STEP or DXF for instant pricing, or send a drawing for a custom quote. See how we check every part on our quality page, or visit us at 170 Ayer Rd, Littleton, MA.

Get My Quote Talk to the Team